Truck Bed Wheelchair Lift

June 22nd, 2009 | Author: admin

No items matching your keywords were found.

Truck Bed Wheelchair Lift

No items matching your keywords were found.

Plasti-Kote Truck Bed Liner Gallon

$59.95

IMPORTANT SHIPPING INFORMATION: UPS 2nd Day Air Service is NOT available. This item must be shipped via UPS Ground Service ONLY. Ground Service can only be delivered within the 48 continental United States. Plati-kote Truck Bed Liner provides maximum protection for your new or used truck bed. This textured spray permanently bonds to surface paint. Texture, non-skid rubber granules. Roll-on, brush-on or spray-on. Resists abrasion. Compatible with original factory paint surface and metal, iron and steel. Truck bed liner may lift or wrinkle a non-original factory finish. Application Tips: Items needed - Wax & Grease Remover, #80 or #180 grit sandpaper, masking tape and paper. For roll-on application, a paint tray and a 3 inch wide, 3/8 nap, general purpose roller is required. For spray-on application, an undercoat spray gun is required. This product is designed to be applied only over the ORIGINAL FACTORY FINISH or Plasti-Kote AEROSOL Truck Bed Liner. Repainted surfaces may wrinkle or lift. PREPARATION - Truck bed should be high pressure washed and rinsed. Dry thoroughly. Clean all surfaces with Wax and Grease Remover. Sand all areas to be painted with #80 - #180 grit sandpaper. Rewash the truck bed to remove sanding residue. ROLL ON APPLICATION - Paint the corners, under the bed rails, and other difficult to reach areas first with a 2-3 inch paint brush, or use Plasti-Kote #265 Black Aerosol Truck Bed Liner. Paint the front and side vertical surfaces of the truck bed first. Paint the truck bed floor, starting at the front of the truck bed and work your way back. Allow 24 hours dry time before using the truck bed. SPRAY ON APPLICATION - A minimum of 35 p.s.i. at the gun is needed for proper application. Test on an inconspicuous area to ensure proper pressure and desired texture. Follow ROLL-ON instructions above. CLEAN UP - While still wet, excess Truck Bed Liner can be wiped away with soap and water. Truck Bed Liner can not be removed after it dries. TOUCH UP - Your Plasti-Kote Truck Bed Liner is extremely durable. However, should it be necessary to touch up an area, you can roll-on or spray-on more #265G product; or you can apply Plasti-Kote #265 Aerosol Truck Bed Liner. Coverage: One gallon covers a full size bed. Black bed liner *Color viewed here are approximate and may vary from actual painted colors.

AutoLoc Snap-In Tonneau Cover Opener - Gas Lift Shocks for Truck Bed Covers

$399.95

Tonneau Accessories by AutoLoc. AutoLoc Snap-In Tonneau Cover Opener Features - Easily open and close your tonneau cover with the AutoLoc Snap-In Tonneau Cover Opener. Replaces existing gas struts on your manual lifting cover. Quick bolt-on installation. Works with a variety of trucks and tonneau covers. Optional one-touch express mode, long-range remote and security alarm. AutoLoc Snap-In Tonneau Cover Shocks - Gas Lift Shocks for Truck Bed Covers. For the top selection of AutoLoc Tonneau Covers shop online today. The AutoLoc Snap-In Tonneau Cover Shocks - Gas Lift Shocks for Truck Bed Covers will improve and personalize your vehicle. Tonneau Accessories by AutoLoc - selected by many auto enthusiasts in the top automotive discussion forums. AutoLoc Snap-In Tonneau Cover Opener for your vehicle will deliver the results you are looking for! AutoLoc Snap-In Tonneau Cover Opener - Tonneau Covers - Tonneau Accessories.