The EZAccess Wheelchair Oxygen Carrier is available in single or dual tank capacity. This versatile carrier features an adjustable snap for holding either D or E cylinder. Extra long straps adjust to fit any wheelchair and allow the carrier to be positioned offcenter avoiding uncomfortable contact with head or back. Single carrier made of durable lightweight nylon. Dual carrier is made of lightweight mesh and features a convenient storage pocket for magazines nasal mask etc. Available in black.
Wheelchair Carrier takes pride in introducing newest line of patriotic electric lifts This lift offers the same benefits and features offered in Lift n Go but with a customized United States flag platform This lift comes in both power chair and scooter sized platforms. Loading and unloading is a breeze from either side of the platform. This electric carrier is fully powered. Just press the button and the lift does all the work Best of all the key switch has its own separate box located in a position that allows the user to stay seated while operating their lift Also includes 2 retractable ratchets for securing the chair and one wire harness. Additional ratchets (sold separately) for power chairs are suggested. Overall Length: 48 of usable platform. Overall Width: 28 . Loading Ramp: Either side. Warranty: 3Year Transferable. Ground Clearance: 24 of possible ground clearance. Built in Pocket for securing your Mid Drive Chair.
This large mesh canopy attaches underneath the wheelchair to hold books packages etc. Convenient hanging design with Velcro attachment features front and back stop flaps to keep items secure. Made of weatherproof mesh. Stain and mildew resistant. Available in black. 17 x 15 x 2 .
Easily attaches under most wheelchairs. Convenient hanging design with Velcrotype closure includes front and back flaps to keep personal items safe and secure. Made of durable easy to clean nylon. Size: 17 x 15 x 2.
Wheelchair Carrier takes pride in introducing newest line of patriotic electric lifts This lift offers the same benefits and features offered in Lift n Go but with a customized United States flag platform This lift comes in both power chair and scooter sized platforms. Loading and unloading is a breeze from either side of the platform. This electric carrier is fully powered. Just press the button and the lift does all the work Best of all the key switch has its own separate box located in a position that allows the user to stay seated while operating their lift Also includes 2 retractable ratchets for securing the chair and one wire harness. Overall Length: 48 of usable platform. Overall Width: 28 . Loading Ramp: Either side. Warranty: 3Year Transferable. Ground Clearance: 24 of possible ground clearance.
Large canopy attaches underneath wheelchair to conveniently hold personal items. Convenient hanging design with hook and loop fasteners attachment. Weather proof mesh. Stain and mildew resistant. length: 22. height: 1. width: 16
Platform size 28 X 48 with 4 tall side rails Weighs 75lbs Folding ramp size 271/2 X 60 long Weight capacity of 400lbs All steel with black powder coat finish Folds up in storage position when not in use For any 11/4 or 2 square receiver (Do NOT exceed your hitch capacity)
Features of the FreeRider Power Wheelchair: 6" caster on front and rear for maximum stability. Easy access charger port and circuit breaker. Height and depth-adjustable foot platform. Built with easy of service mind. Maximum speed: Up to 6.4km/4 mph Ground clearance: 5cm/2" Front Tires: 6" solid option Rear Tires: 6" solid option Turning radius: 52cm/20.5" Suspension: Active-Trac Drive train: Two-motor, mid-wheel drive Braking system: Intelligent braking (electronic, regenerative disc brakes) Standard electronics: 90amp, Dynamic Shark controller Battery charger: Off-board, 5 amp Per-charger range: Up to 35 miles Battery requirements: (2) 12 volt, deep cycle Weight capacity: 350 lbs.
Features of the FreeRider Power Wheelchair: 6" caster on front and rear for maximum stability. Easy access charger port and circuit breaker. Height and depth-adjustable foot platform. Built with easy of service mind. Maximum speed: Up to 6.4km/4 mph Ground clearance: 5cm/2" Front Tires: 6" solid option Rear Tires: 6" solid option Turning radius: 52cm/20.5" Suspension: Active-Trac Drive train: Two-motor, mid-wheel drive Braking system: Intelligent braking (electronic, regenerative disc brakes) Standard electronics: 90amp, Dynamic Shark controller Battery charger: Off-board, 5 amp Per-charger range: Up to 35 miles Battery requirements: (2) 12 volt, deep cycle Weight capacity: 350 lbs.
Great Day Power Ride Gun Carrier When you head to the woods in your UTV, you want to use every inch of your space wisely - to make the most of leg room, passenger room and, especially, equipment storage room. The Power-Ride allows you to transport two firearms safely, securely and out of the way. The Power-Ride Gun Rack mounts snugly at the back of the UTV cab and holds two guns in protective, super-soft cradles with Velcro® retainer straps - safe and secure even in rough terrain rides. The Power-Ride includes a unique mounting base that attaches to the UTV frame and adjusts to fit all popular brands. With the turn of two wing-knobs, the Power-Ride can be installed or removed in seconds making it the most versatile, most convenient accessory ever! One minute you have a plain UTV - the next, you are ready for the hunt. The Power-Ride is framed in super-strong aircraft aluminum and finished with tough, powder-coat paint for years of lasing, dependable service. Features: Transport 2 firearms safely, securely and out of the way Mounts on back of UTV cab Protective soft cradles with Velcro® straps
The weatherresistant transport covers are designed to completely encase your wheelchair/scooter and carrier. Covers consist of black nylon pack cloth with Velcro closure.
For concealed carrier arm support. 4 centers. Carrier arm roughin information not supplied refer to chair carrier manufacturer for roughin information. Back overflow. Uses carrier 111108 for installation (sold separately).
Great Day Power Ride Bow Carrier Safe and secure transport of a bow is one of the most important factors in insuring the successful outcome of a bow hunt. A bow is a relatively fragile piece of equipment - several bow accessories and components - the sight, the arrow rest, wheels, cams and cables could be damaged or, almost as bad, the setting be disturbed. The Power-Ride Bow-Holder is the most practical and space-saving method possible to safely transport a bow in a UTV. Mounts on a unique bracket that attaches to or detaches from the rear of the UTV cab frame in just seconds - where your bow rides safe and sound. Tension loaded holding cradles grip the limbs of any compound or recurve bow firmly and totally prevent any other part of the bow from touching anything. At the end of the ride, your bow will be right and ready. Features: Tension-loaded holding cradles grip the limbs of any compound or recurve bow firmly and prevents any other part of bow to touch Mounts on back of UTV cab
Sturdy steel jaws securely hold batteries. Spring action handles turn lifting power into battery gripping pressure. Form-fitting handle provides a solid gripping surface for your hand. Carrier works on nearly all batteriesm from motorcycles to boats. Saw-tooth jaw tips provide slip-free battery gripping power. Carrier grips battery just below the top lip for good balance. A heavy-duty tool built to last.By Lisle.
